Canon PIXMA iP5300 Service Manual page 30

<Standalone printer operation>
1) Turn on the printer.
2) Press and hold the Resume/Cancel button until the LED blinks the specified number of times listed in the table
below, and release it. The operation starts.
LED
blinking
1 time Print head manual cleaning
2 times Nozzle check pattern printing
3 times Paper feed roller cleaning
4 times Automatic print head alignment
5 times Bottom plate cleaning
6 times Unspecified
7 times Head-to-paper distance setting to the
widest
8 times or Unspecified
more
(5) Service mode
Function
Service test print
- Model name
- Destination
- ROM version
- USB serial number
- Ink absorber counter value (ink
amount in the ink absorber)
- LF / Eject correction value
- CD / DVD sensor correction
value
- Ink system function check
result
- CD / DVD sensor correction
result
EEPROM initialization
Operation
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
Set a sheet of plain paper (A4 or Letter) in the ASF or the
cassette (according to the Paper Feed Switch button setting).
Set 2 sheets of Matte Photo Paper MP-101 (A4 or Letter) in
the ASF.
Fold a sheet of plain paper (A4 or Letter) in half crosswise,
then unfold and set it in the ASF with the folded ridge facing
down.
Set a sheet of A4 or Letter size paper in the
ASF (cassette not usable).
For print sample, see
(1) Service test print, <Service test print
sample>.
The following items are NOT initialized, and
the shipment arrival flag is not on:
- USB serial number
- Destination settings
Remarks
Remarks
3-4. Verification Items,