Canon PIXMA iP5300 Service Manual page 32

10 times Green (Power)
11 times Orange (Alarm)
12 to 15 Green (Power),
times Orange (Alarm)
16 times or Orange (Alarm)
more
Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm LED (orange) lights steadily without
any changes.
<Destination settings>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the
destination listed in the table below, and press the Power button.
Time(s) LED indication
0 times Green (Power)
1 time Orange (Alarm)
2 times Green (Power)
3 times Orange (Alarm)
4 times Green (Power)
5 times Orange (Alarm)
6 times Green (Power)
7 times Orange (Alarm)
8 times Green (Power)
9 times Orange (Alarm)
10 times or
Green (Power)
more
Note: After setting the destination, confirm the model name and destination in service test print or EEPROM
information print.
[See 3-4. Verification Items,
<LF / Eject correction>
After replacement of the feed roller ass'y or the logic board ass'y in repair servicing or in refurbishment operation,
perform the adjustment.
Details: Print the LF / Eject correction pattern on a sheet of paper. Select the Pattern No. (0 to 2) in which streaks
or lines are the least noticeable, press the Resume/Cancel button the same number of time(s) as the
selected Pattern No., then press the Power button. (See the flowchart below.)
1) In the LF /Eject correction mode, press the Resume/Cancel button the specified number of time(s) according to
the paper to be used in LF / Eject correction listed in the table below, then press the Power button. (Set a sheet
of selected paper in the ASF.)
direction)
LF / Eject correction
Left margin correction
Return to the menu
selection
Return to the menu
selection
Destination
No change of the destination
Japan
Korea
US
Europe
Australia
Asia
China
Taiwan
Canada, LAM
Return to the menu selection
(1) Service test
Time(s) (L)
1 time HR-101
2 times GF-500, Office Planner
print, or (2) EEPROM information
Paper
CD / DVD print
Supported
Not supported
Not supported
Supported
Supported
Supported
Supported
Supported
Supported
print.]