Codabar Start/Stop Character - PSC QuickScan 6000 Programming Manual

Codabar Start/Stop Character

These bar codes allow you to set the Start/Stop character format and trans-
mission. Refer to your host user's manual to identify your system require-
ments, then use these labels to select which characters are transmitted.
SET ----------------------------------------------
M
ATCH NOT
M
ATCH
D
ON
T
RANSMIT
F
ORMAT
F
ORMAT
F
ORMAT
F
ORMAT
END ----------------------------------------------
1
Choosing Transmit Start/Stop characters requires selecting one of these four data format
selections: ABCD/TN*E, abcd, tn*e, ABCD/ABCD, or abcd/abcd. Refer to Appendix A,
Standard Factory Settings , to identify the default setting for your scanner's interface type.
74
R
EQUIRED
R ------------------
EQUIRED
' T -------------------
T RANSMIT
1
--------------------------
= ABCD/TN*E --------
= abcd/tn*e ------------
= ABCD/ABCD -------
= abcd/abcd -----------
QuickScan 6000/6000 Plus Programming Guide
-------------