Ibm 4682/92 Port E Interface Selection - PSC QuickScan 6000 Programming Manual

IBM 4682/92 Port E Interface Selection

Scan this label to enable the IBM 468x/9x Port E interface.
Data Format: Send As Code 39 — converts bar code data (UPC/EAN,
add-ons, Code 93, Codabar, MSI/Plessey and Code 128) into Code 39
format before sending the data to the host.
These settings are for IBM 4682/92 Port E interface ONLY.
Limit Command Set — is an option that causes the scanner to ignore
'enable scanner' and 'disable scanner' commands sent from the host.
Transmit Unsolicited Status
to transmit a status message to the host upon receipt of an "SNRM".
SET ----------------------------------------------
S
END AS
D
ON
E
NABLE
D
ISABLE
T
RANSMIT
D ' T
ON T RANSMIT
END ----------------------------------------------
1 For this IBM interface, the setting for Unsolicited Status is normally Disabled.
R44-1540
IBM 4682/92 Port E Settings
1
— when enabled, this option causes the scanner
C 39 ----------------
ODE
' S C
T END AS ODE
L C
IMIT OMMAND
L C
IMIT OMMAND
U
NSOLICITED
U
NSOLICITED
39 --------
S -----
ET
S -----
ET
S ---
TATUS
S ---
TATUS
11