PSC QuickScan 6000 Programming Manual page 44

Setting Symbology Specific Label Identifiers (Label I.D.)
(Continued)
4. Scan the label representing the symbology whose label
identifier you wish to modify.
In our example, we would scan the 'UPC-A' symbology label.
5. Identify and scan the digits that correspond to the Hex
Values.
The hex values from the ASCII chart that correspond to 'A1'
from our example are as follows:
31
hex
order: 4, 1, 3, 1.
6. Scan the END label.
In our example, you have changed the default label identifier
prefix for UPC-A from 'A' to 'A1'.
SET ----------------------------------------------
D
ISABLE
T
RANSMIT
T
RANSMIT
40
= '1'. Thus, we would scan digit programming labels in this
L I.D. C
ABEL ONTROL
L I.D. P
ABEL AS
L I.D. S
ABEL AS
QuickScan 6000/6000 Plus Programming Guide
41
-------
-----
REFIX
-----
UFFIX
= 'A', and
hex