Debug Mode; Autosense® Stand Mode - PSC QuickScan 6000 Programming Manual

Debug Mode

When enabled, this mode will cause any product labels that are read to
be discarded with no attempt made to transmit them to a host. Any host
scanning control will also be disabled while this option is in effect. This
mode may be enabled in conjunction with any of the defined host
interfaces. All other programmable options that are set for that interface
will remain in effect while in debug mode.
SET ----------------------------------------------
E
NABLE
D
ISABLE
END ----------------------------------------------
®
AutoSense
AutoSense Stand Mode must be enabled when the scanner is used with
the QuickScan 6000/6000 Plus stand accessory. This feature allows "hands
free" operation of the scanner when placed in the stand.
Very Low Power Mode must be disabled when using AutoSense
Stand Mode, as these features are not compatible and may cause
unexpected behavior.
SET ----------------------------------------------
E
NABLE
D
ISABLE
END ----------------------------------------------
86
-----------------------------
-----------------------------
Stand Mode
-----------------------------
-----------------------------
QuickScan 6000/6000 Plus Programming Guide
WARNING