Ocia Options - PSC QuickScan 6000 Programming Manual

OCIA Options

Use these labels to change the settings as desired. The following brief
descriptions explain each selection.
Beep if Not on File — when enabled requires the scanner to
beep when a label is scanned that is not on file.
Host Commands — when enabled allows the scanner to
accept commands directly from the host.
Intercharacter Delay — refers to a pause, if any, between
each character before being sent to the host. This time delay is
used to control the flow of data from the scanner, but it should
not be required for most applications. When enabled, OCIA
intercharacter delay is set at 70µs.
SET ----------------------------------------------
E
NABLE
D
ISABLE
E
NABLE
D
ISABLE
E
NABLE
D
ISABLE
END ----------------------------------------------
R44-1540
-----------------------------
-----------------------------
-----------------------------
-----------------------------
-----------------------------
-----------------------------
13