Connect To A Laptop/No Keyboard Attached - PSC QuickScan 6000 Programming Manual

PC Keyboard Wedge –

Connect to a Laptop/No Keyboard Attached

If no keyboard is attached, the scanner must provide the acknowledge
signal to the PC. In this case, enable the "Laptop/No External Keyboard"
mode. If a keyboard is attached, enable "Keyboard Attached".
Laptop (integrated keyboard) — scan the "Laptop/No External Key-
board" label below when the scanner is connected to a laptop computer
or when the scanner is operated with no external keyboard attached.
PC (external keyboard) — if you move the scanner to a standard PC,
change the setting to "Keyboard Attached".
Send Control Characters — when this feature is disabled, all ASCII
characters except NUL (00h) are transmitted. Enabling this feature limits
transmission of ASCII characters to the following:
• Only ASCII characters between 20h..127h, plus...
- Carriage Return (CR=0Dh)
- BackSpace (BS=08h)
- Right Tab (HT=09h)
- Left Tab (0Bh)
- Esc (1Bh)
SET ----------------------------------------------
L
APTOP
K
EYBOARD
E
NABLE
D
ISABLE
END ----------------------------------------------
26
/N E K
O XTERNAL EYBOARD
A --------------
TTACHED
-----------------------------
-----------------------------
QuickScan 6000/6000 Plus Programming Guide
-