PSC QuickScan 6000 Programming Manual page 64

Follow these steps to set Code 39 Minimum Label Length:
1. Identify the minimum length setting you want to make. The
selectable range is 00 to 48
2. Scan the SET label.
3. Scan the SET CODE 39 MINIMUM LABEL LENGTH bar code.
Setting Lengths
If you are setting a length less than ten, you must scan a zero first and
then the length digit ( 04, 06, 08).
4. Set the minimum label length by scanning the correct digits
from below and the next page.
5. Scan the END label.
SET ----------------------------------------------
S
ET
0 ------------------------------------
1 ------------------------------------
2 ------------------------------------
3 ------------------------------------
4 ------------------------------------
* The IBM POS Interface is limited to 32 character labels.
60
Code 39 (
M L L
INIMUM ABEL
QuickScan 6000/6000 Plus Programming Guide
continued
*
characters.
------
ENGTH
)