[Film Mode] - Panasonic Lumix DMC-L10K Operating Instructions Manual

[FILM MODE]

Setting the color tone of the
picture to be recorded
[You can only select [STANDARD] and
[STANDARD] ( ) in [
[ ], [ ] and [ ] mode.]
Press [ ] to display the [REC] mode
MENU
/SET
menu and select the item to set. (P24)
Every type of film for film cameras has its
own color tone and contrast characteristics.
In film mode, you can select the color tone
of the pictures from 9 types in the same
way as you would select different films for
film cameras.
Select different settings in film mode to
match the recording situation and your
picture of the recording.
1 Press 2/1 or use the rear dial to
select an item.
• When you press [DISPLAY] on the
screen shown above, explanations
about each film mode are displayed.
(When you press [DISPLAY] again, the
screen returns to the previous screen.)
2 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
∫ Setting and effect
• [STANDARD] (COLOR)
This is the standard setting.
• [DYNAMIC] (COLOR)
The saturation and contrast of the stored
colors are increased.
• [NATURE] (COLOR)
Brighter red, green and blue. Enhanced
beauty of nature.
], [ ], [ ],
• [SMOOTH] (COLOR)
The contrast is lowered for smoother and
clearer color.
• [NOSTALGIC] (COLOR)
Lower saturation and contrast. Reflecting
passage of time.
• [VIBRANT] (COLOR)
Higher saturation and contrast than
dynamic.
• [STANDARD] (
This is the standard setting.
• [DYNAMIC] (
The contrast is increased.
• [SMOOTH] (
Smooths the picture without losing the
skin texture.
or
• [MY FILM1]
• [MY FILM2]
The saved setting is used.
• In film mode, the camera may do
something equivalent to pull processing to
create a picture with particular
characteristics. The shutter speed may
become very slow at this time.
• You can also use the [FILM MODE] button
to switch to Live View and to set
[FILM MODE].
Menu Settings
)
)
)
89
VQT1G46