Panasonic Lumix DMC-L10K Operating Instructions Manual page 140

Others
3: A certain part of the picture appears
blinking in black and white.
• Is [HIGHLIGHT] set to [ON]?
– This appears due to the highlight
feature function which shows white
saturated areas. (P28)
4: The AF assist lamp does not turn on.
• Check the [AF ASSIST LAMP] setting in
the [CUSTOM] menu. (P103)
• Are you taking pictures in dark places?
– The AF assist lamp does not turn on
in bright places.
5: The camera becomes warm.
• The surface of the camera and the
reverse side of the LCD monitor may
become warm during use. This does
not affect the performance or quality of
the camera.
6: The clock is reset.
• If you do not use the camera for a long
time, the clock may be reset. When the
message [PLEASE SET THE CLOCK]
appears, set the clock again. (P22)
• When you take a picture before setting
the clock, [0:00 0. 0.
7: Colors appear on the picture which
were not found in the actual scene.
• Depending on the zoom magnification,
the picture may have some colored
fringes around the subject. This is
called chromatic aberration and may be
more visible when recording distant
subjects. However this is not a
malfunction.
8: The file numbers are not recorded
consecutively.
• When you perform an operation after
taking a certain action, the pictures may
be recorded in folders with different
numbers from the ones used prior to
the operation. (P116)
140
VQT1G46
9: The file numbers are recorded in
ascending order.
• If the battery is inserted or removed
when the camera is not turned off, the
recorded folder numbers are lost.
However if you turn the camera on
again and record pictures, the recorded
folder numbers are different from the
prior recorded folder numbers.
0] is recorded.