Printing The Pictures - Panasonic Lumix DMC-L10K Operating Instructions Manual

∫ PictBridge (PTP) setting
Even if you set [USB MODE] to
[PictBridge (PTP)], you can connect to your
PC if the OS is "Windows XP",
"Windows Vista" or "Mac OS X".
• Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
• Do not use any other USB connection
cables except the supplied one.
• Do not disconnect the USB connection
cable while [ACCESS] is displayed.
• If battery power is exhausted while the
camera and the PC are communicating,
the recorded data may be damaged. Use
a battery with sufficient battery power
(P16) or the AC adaptor (P125).
• If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator blinks
and the alarm beeps. In this case, stop
the communication at once on the PC.
• When connecting the camera to a
"Windows 2000" OS PC with the USB
connection cable, do not replace the
card while the camera and the PC are
connected. The information on the card
may be damaged. Disconnect the USB
connection cable before replacing the
card.
• Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P45), multi playback (P49) and calendar
playback (P50).
• For information about this, refer to the
separate operating instructions for PC
connection.
• Read the operating instructions for the
PC.
Connecting to other equipment

Printing the Pictures

By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to print and start printing on the
camera's screen.
Set print settings such as the print quality
on the printer beforehand. (Read the printer
operating instructions.)
C
B
A USB connection cable (supplied)
B DC cable (DMW-DCC1; optional)
• It may take time to print the pictures so
use a battery with sufficient battery power
(P16) or the AC Adaptor (P125) when you
connect to a printer.
• Turn the camera off and then insert or
remove the cable for the AC Adaptor
(P125).
A
117
VQT1G46