[Burst Rate]; [Auto Bracket]; [Self-Timer]; [Mirror Up] - Panasonic Lumix DMC-L10K Operating Instructions Manual

[BURST RATE]

Setting the burst speed
MENU
Press [ ] to display the [REC] mode
/SET
menu and select the item to set. (P24)
You can set the burst speed to [H] (High
speed) or [L] (Low speed).
Refer to P68 for more information.

[AUTO BRACKET]

Taking Pictures using Auto
Bracket
MENU
Press [ ] to display the [REC] mode
/SET
menu and select the item to set. (P24)
In this mode, up to 3 pictures are recorded
in the selected exposure compensation
range each time the shutter button is
pressed.
You can set the compensation range of the
exposure and the bracket order.
Refer to P69 for more information.

[SELF-TIMER]

Setting the time for the self-timer
MENU
Press [ ] to display the [REC] mode
/SET
menu and select the item to set. (P24)
You can set the time for the self-timer from
10 seconds, 10 seconds/3 pictures or
2 seconds.
Refer to P71 for more information.

[MIRROR UP]

Preventing jitter caused by the
mirror
MENU
Press [ ] to display the [REC] mode
/SET
menu and select the item to set. (P24)
You can prevent jitter (camera shake)
caused by the mirror when the self-timer is
set. (P71)
[ON] The mirror goes up before the
countdown starts. This prevents
camera shake when the mirror
rises.
[OFF] After the countdown is finished, the
mirror goes up at the same time
the picture is taken.
Menu Settings
99
VQT1G46