Panasonic Lumix DMC-L10K Operating Instructions Manual page 28

Preparation
[HIGHLIGHT]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P24)
[OFF] No highlight display
[ON] When the auto review function
is activated or when playing
back, white saturated areas
appear blinking in black and
white.
[ON]
• If there are any white saturated areas, we
recommend compensating the exposure
towards negative (P41) referring to the
histogram (P52) and then taking the
picture again. It may result in a better
quality picture.
• There may be white saturated areas if the
distance between the camera and the
subject is too close when taking pictures
with the flash.
If [HIGHLIGHT] is set to [ON] in this case,
the area directly illuminated by the photo
flash will become white saturated and
appear blinking in black and white.
[VIDEO OUT]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P24)
Set to match the colour television system in
each country.
[NTSC]: Video output is set to NTSC
system.
[PAL]: Video output is set to PAL
system.
• Video output is available in playback
mode only.
28
VQT1G46
[TV ASPECT]
Press [
MENU
/SET
and select the item to set. (P24)
Set to match the type of TV.
[ ]:
[ ]:
• The TV aspect setting is effective in video
output only.
[OFF]
[LANGUAGE]
Press [
MENU
/SET
and select the item to set. (P24)
Set the language displayed on the screen.
[ENGLISH], [DEUTSCH], [FRANÇAIS],
[ESPAÑOL], [ITALIANO], [
• If you set a different language by mistake,
select [
desired language.
Ver. [VERSION DISP.]
Press [
MENU
/SET
and select the item to set. (P24)
This enables the firmware versions of the
camera and lens to be checked.
• [–. –] is displayed as the lens firmware
when the lens is not mounted.
] to display the [SETUP] menu
When connecting to a 16:9
screen TV.
When connecting to a 4:3
screen TV.
] to display the [SETUP] menu
]
] from the menu icons to set the
] to display the [SETUP] menu