Panasonic Lumix DMC-L10K Operating Instructions Manual page 26

Preparation
auto review when taking pictures with the
drive mode lever set to [
[ ] (P71).
• When [HOLD] has been selected, the
zoom time cannot be set.
• When [HOLD] has been selected, press
the shutter button halfway to release the
auto review.
• If you use burst mode (P68) or auto
bracket (P69), the auto review function is
activated regardless of the setting for auto
review. (The picture is not enlarged.)
• If [HIGHLIGHT] (P28) is set to [ON], white
saturated areas appear blinking in black
and white when the auto review function is
activated.
[POWER SAVE]
(Turning off this unit automatically.)
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P24)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[OFF], [1MIN.], [2MIN.], [5MIN.], [10MIN.]
• Press the shutter button halfway or turn
this unit off and on to cancel power save
mode.
• Power save mode is not activated in the
following cases.
– When using the AC adaptor (P125)
– When connecting to a PC or a printer
– During a slide show
26
VQT1G46
[WORLD TIME] (P126)
] (P33) or
Press [
MENU
/SET
and select the item to set. (P24)
Set the time in your home area and travel
destination.
[ ]:
[ ]:
[MONITOR]
Press [
MENU
/SET
and select the item to set. (P24)
The brightness of the screen can be
adjusted in 7 steps.
[LCD AUTO]
Press [
MENU
/SET
and select the item to set. (P24)
If you set [ON] and take pictures with the
Viewfinder, the LCD monitor turns off while
the shutter button is pressed halfway.
[OFF]
[ON]
[BEEP]
Press [
MENU
/SET
and select the item to set. (P24)
Set the focus confirmation beep, the
self-timer beep and the alarm beep.
[OFF]
[ON]
] to display the [SETUP] menu
Travel destination area
Your home area
] to display the [SETUP] menu
] to display the [SETUP] menu
] to display the [SETUP] menu