Inserting/Removing The Battery - Panasonic Lumix DMC-L10K Operating Instructions Manual

Preparation
∫ Charging conditions
• Charge the battery in a temperature
between 10 oC to 35 oC (The battery
temperature should also be the same.)
• The performance of the battery may
temporarily deteriorate and the operating
time may become shorter in low
temperature conditions (e.g. skiing/
snowboarding).
• The battery may swell and its operating
time may become shorter as the number
of times it is charged increases. For long
term battery use, we recommend you do
not frequently charge the battery before it
is exhausted.
18
VQT1G46
Inserting/Removing
the Battery
• Check that the camera is turned off.
• Close the flash.
1 Slide the release lever in the
direction of the arrow (OPEN
side) and then open the battery
door.
• Always use genuine Panasonic
batteries (DMW-BLA13E).
• If you use other batteries, we cannot
guarantee the quality of this product.
2 Insert:
Insert the charged battery fully
until it clicks.
Remove:
Push the lever A in the direction
of the arrow to remove.
A
• Be careful of the direction indicated by
the mark [ ] on the battery when
inserting the battery.