Adjusting The Flash Output; Setting To The 2Nd Curtain Synchro - Panasonic Lumix DMC-L10K Operating Instructions Manual

Adjusting the flash output

Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[FLASH ADJUST.] in the [REC]
] and then press 1.
menu [
3 Press 2/1 to adjust the flash
output and then press [MENU/SET].
• Select [0] to return to the original flash
output.
• You can also use the front dial or the
rear dial to set.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
• You can adjust from [`2 EV] to [_2 EV] in
steps of [1/3 EV].
• If you adjust the flash output, the adjusted
flash output value is displayed on the LCD
monitor. Also, [ ] is displayed on the
Viewfinder.
• The flash output setting is memorised
even if the camera is turned off.

Setting to the 2nd Curtain Synchro

2nd curtain synchro activates the flash just
before the shutter closes when taking
pictures of moving objects such as cars
using a slow shutter speed.
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[FLASH SYNC.] in the [REC]
] and then press 1.
menu [
3 Press 4 to select [2ND] and then
press [MENU/SET].
MENU
/SET
• You can also use the front dial or the
rear dial to select a menu item.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
∫ 1st curtain synchro
P A
• The normal method when taking
pictures with the flash.
Advanced
MENU
/SET
2560
19
F2.8 1/25
65
VQT1G46