Setting Date/Time (Clock Set); Changing The Clock Setting - Panasonic Lumix DMC-L10K Operating Instructions Manual

Preparation
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
A
B
PLEASE SET THE CLOCK
MENU
CLOCK SET
SET
A [MENU/SET] button
B Cursor buttons
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
date and time.
:
:
A Time at the home area
B Time at the travel destination (P126)
2/1:
Select the desired item.
3/4:
Set the display order for the
date and time.
: Cancel without setting the
clock.
• You can also use the front dial or the
rear dial to set.
22
VQT1G46
3 Press [MENU/SET] to set.
• Turn the camera off after finishing
setting the clock. Then turn it on and
check that the clock setting is correct.

Changing the clock setting

1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[CLOCK SET] in the [SETUP] menu
[ ] and then press 1. (P25)
3 Set as shown on steps
4 Press [MENU/SET] to close the menu.
• When a fully charged battery has been
inserted for more than 24 hours, charging
of the built-in battery for the clock is
completed so the clock setting will be
stored (in the camera) for at least
3 months even if the battery is removed.
(If you insert a battery that is not
sufficiently charged, the length of time that
the clock setting is stored may become
less.) However the clock setting is
cancelled after this time. In this case, set
the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If the date is not set in the camera it will
not be printed correctly when you use a
photo printing service, even if the store
provides a date printing option for your
photographs. (P110)
• If the date is set in the camera it will be
printed correctly even if the date is not
displayed on the screen of the camera.
2 3
and .