Using The [Rec] Mode Menu; [Film Mode] - Panasonic LUMIX DMC-LX3 Operating Instructions Manual

Advanced (Recording pictures)
3 Press 2/1 to select the home area, and then
press [MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
If daylight saving time [
•
3. Press 3 again to return to the original time.
The daylight saving time setting for the home area does not
•
advance the current time. Advance the clock setting by one
hour.
4
Press 3 to select [DESTINATION] and then
press [MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
5
Press 2/1 to select the area the travel
destination is in and then press [MENU/SET] to
set.
D Current time of the destination area
E Time difference
If daylight saving time [
•
press 3. (The time advances by one hour.) Press 3 again to
return to the original time.
6
Press [MENU/SET] to close the menu.
Note
Return the setting to [HOME] when the vacation is finished by performing steps
•
If [HOME] is already set, change only the travel destination, and use.
•
If you cannot find the travel destination in the areas displayed on the screen, set by the time
•
difference from the home area.
The travel destination icon ["] appears when playing back pictures taken at the travel
•
destination.

Using the [REC] Mode Menu

For details on [REC] mode menu settings, refer to P23.
Every type of film for film cameras has its own colour tone and contrast characteristics. In
film mode, you can select the colour tone of the pictures from 9 types in the same way as
you would select different films for film cameras.
Select different settings in film mode to match the recording situation and your picture of
the recording.
Applicable modes:
76
VQT1T39
] is used at the home area, press
] is used at the travel destination,

[FILM MODE]

A
B
C
D
E
1 2
, and
3
.