Panasonic Lumix DMC-L10K Operating Instructions Manual page 139

5: White round spots like soap bubbles
appear on the recorded picture.
• If you take a
picture with the
flash in a dark
place or
indoors, white
orbs may
appear in the picture because the flash
reflects off particles of dust in the air.
This is not a malfunction. This is
identifiable from the number of round
spots and their locations, which will
differ in every picture.
• A characteristic of this is that the
number of round spots and their
position differ in every picture.
∫ TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: The display areas on the TV screen
and the camera's LCD monitor are
different.
Depending on the TV model, the area
display may be smaller so the picture
may be stretched horizontally or
vertically and the top and bottom or left
and right of the picture may be cut off
when it is displayed. This is due to the
TV specifications and is not a
malfunction.
3: The picture cannot be transferred
when the camera is connected to a
PC.
• Is the camera connected to the PC
correctly?
• Is the camera recognized by the PC
correctly?
• Set [USB MODE] to [PC]. (P27, 115)
4: The card is not recognized by the
PC.
• Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
5: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
– You cannot print pictures with printers
which do not support PictBridge.
(P117)
• Set [USB MODE] to [PictBridge (PTP)].
(P27, 117)
6: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
• Depending on the photo printing store,
you may be able to print pictures in 16:9
size if they were recorded when the
aspect ratio setting (P91) was [16:9].
Check with the photo printing store
before printing.
7: The picture is not displayed fully on
the TV.
• Check the [TV ASPECT] setting on the
camera. (P28)
∫ Others
1: An unreadable language was
selected by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [
icon to set the desired language. (P28)
2: A sound is heard when the camera is
turned on or off.
This is the sound of lens or aperture
movement and is not a malfunction.
Others
]
139
VQT1G46