MINOLTA-QMS PagePro 9100 User Manual page 43

6
Insert the right end of the paper
retainer c into the slot for the
size of paper to be loaded d.
The paper size is detected
depending on the position of
the paper retainer. Correctly
position the paper retainer
according to the size of paper
to be loaded.
7
Slide the paper retainer to the
left c, and then press down on
the gray lever d to secure the
paper retainer.
Attention
Make sure the paper retainer is
seated properly.
8
Align the four edges of the paper,
and then load the paper printing
side up.
„ A4, B5, Letter, and smaller paper short-edge feed (SEF).
„ A3, B4, Ledger, and larger paper long-edge feed (LEF).
A4, B5, Letter, and Smaller
A maximum of 500 sheets (20 lb bond [75 g/m
loaded. If media is loaded past the triangular mark, it may not be fed
correctly.
Loading Media
A3, B4, Ledger, and Larger
2
] plain paper) can be
2
1
37