Installing The 4-Bin Mailbox - MINOLTA-QMS PagePro 9100 User Manual

Installing the 4-bin Mailbox

5 "
If both the duplexer and the 4-bin mailbox are to be installed, install
the 4-bin mailbox first.
If the duplexer is already installed, remove it before installing the 4-bin
mailbox. See "Packaging" on page 135.
1
Turn off the printer and unplug the power supply cord and interface cable.
2
Open the top cover.
Attention
Never touch
the copper
or brass
electrodes
c c c c or electrical
parts that are
located inside
the top cover
and under-
neath the
toner cartridge,
as a printer
malfunction
can result.
Be careful not
to touch d#
around the
image transfer roller ( touching certain parts in this area may result in
reduced print quality) or e e e e around the fusing unit (since the inside
reaches temperatures of about 392 °F (200 °C), touching any part in
this area may result in burns).
4-bin Mailbox
d#
d# d#
c
1
d
2
e
3
2
1
99