Repacking The Printer - MINOLTA-QMS PagePro 9100 User Manual

6
Reinstall the accessories you removed in step 2.
5 "
We strongly suggest that you save the packaging materials in
case you ever need to move or ship the printer.

Repacking the Printer

If you need to relocate or ship your printer after installation, you must follow
the procedures in this document to prevent damage to the printer and to keep
your warranty valid.
5 "
We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer. If you're returning the
printer for service, you don't need to return the accessories, documen-
tation, interface cables, media tray(s), power cable, or toner car-
tridges.
Attention
MINOLTA-QMS cannot be held responsible for damage to your printer
during shipment that results from the improper packaging of your
printer. You must use the instructions given in this section before
repacking the printer in its original shipping carton with the original
packing materials. Original shipping cartons are secured using
disposable strapping and buckling supplies. These supplies must be
replaced prior to shipping the printer. If you need replacement
packaging, in the United States, call MINOLTA-QMS Spares at
(251) 633-4300 extension 2530 and request catalog number
2600713-100. For locations outside the United States, refer to the
Service & Support Guide or www.minolta-qms.com. If you return the
printer for service, be sure to write the RMA (Return Merchandise
Authorization) number you received from your customer support
representative on the outside of the carton before shipping the printer.
If the printer is not strapped to the pallet or if the RMA number is not
prominently visible on the outside of the return inventory, we will not
accept receipt. You can also have a MINOLTA-QMS authorized service
provider uninstall and repack your printer. For prices and availability,
call 1 (877) 778-2657.
What's involved in repacking?
1
Remove the cables and media tray(s).
2
Remove the toner cartridge.
3
Remove the duplex unit (if attached).
136 Repacking the Printer