Setting The Time And Adjusting The Stopwatch Hand Position - Pulsar 7T62 Manual

ADJUSTING THE STOPWATCH HAND POSITION
This watch is so designed that the following are all made with the crown at the
second click position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1)
and 2) at the same time. If needed, 3) should also be adjusted then.
CROWN
4
SETTING THE TIME AND
Pull out to second click when the second hand is at the 12
o'clock position.