Page 1
CAL. 7S26 AUTOMATIC DIVER TIME/CALENDAR Hour, minute and second hands Date 200 METER WATER RESISTANCE Suitable for scuba diving ROTATING BEZEL Elapsed time measurement during diving (up to 60 minutes) SCREW DOWN CROWN...
SCREW DOWN CROWN DISPLAY AND CROWN/BUTTONS [for models with screw down crown] Unlocking the crown Hour hand Minute hand 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. Day and date Locking the crown MON 15 1 Push Crown back in to normal position.
HOW TO START THE WATCH TIME/CALENDAR SETTING This is an automatic mechanical watch. To initially start your watch: CROWN Swing it from side to side in a horizontal arc for about 30 seconds. * If the watch is worn on the wrist, the mainspring will be wound automatically through 1 Unlock the crown by turning it normal wrist movement.
* Turn the hands past the 12 o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the calendar changes when the hour hand passes the 12 o’clock marker, the time is set for A.M. If the calendar does not change, the time is set for P.M.
“ ” mark aligns with the minute hand. • the time and calendar are appropriately set. If there are any malfunctions, we recommend that you contact an AUTHORIZED PULSAR DEALER or SERVICE CENTER. WHILE DIVING Do not operate the crown when the watch is wet or in water.
Otherwise, use the Water resistance (10 bar/15 bar/20 bar)* have it checked by an AUTHORIZED PULSAR watch together with an underwater flashlight. If “WATER RESISTANT 10 BAR”, DEALER or SERVICE CENTER.
Pressure in bar is a test pressure and should not be considered as corresponding your watch checked by an careful not to drop your Years AUTHORIZED PULSAR to actual diving depth since swimming movement tends to increase the watch or hit it against hard surfaces, as this may DEALER or SERVICE CENTER to pressure at a given depth.
Need help?
Do you have a question about the 7S26 and is the answer not in the manual?
Questions and answers