Yowza delray elite Assembly Instructions And Owner's Manual page 55

COMPUTER OPERATION
P9 -11: CUSTOM COURSE 1 – 3 (C1-C3) PROGRAM
If the user selects the P9 program and presses ENTER button, the LCD will display" C1", and"C1" will be flashing, using the "SPEED-
UP/SPEED-DOWN " button to select code from" C1" to "C3". Or LCD will display the previously saved Speed Profile or Preset Profile.
TIME SETTING
User selects the "C1" and presses then ENTER button, the"TIME" window will display the default time"60:00"and flashing . Then
press the "SPEED-UP/SPEED-DOWN" button to adjust the preset time, or the program can maintain settings for a total workout
period of 60 minutes.
CUSTOM PROFILE SETTING
After TIME setting has been completed, press the ENTER button. Then the "TIME" window will display the"5 - 01",speed profile with
dot matrix will be flashing and display in the center of LCD , the "SAVE" light will be flashing. At this point, user may adjust speed and
incline intervals respectively using "SPEED-UP/SPEED-DOWN" button and "INCLINE-UP/INCLINE-DOWN". The program is
designed to then record the settings made for both incline and speed at 1:00 (min.) intervals for replay at a later time. Repeated
operation press the ENTER button to enter the next minute time setting( total time setting 16minutes "5-16")
After TIME CUSTOM PROFILE setting has been completed, user need to press the
profile. If user press the START to initiate the program without pressing the "SAVE" button, the program will not save the profile
The user may then press START to initiate the program, P9 – CUSTOM COURSE 1.
During the workout, the user may at any time during the workout period alter the speed with "SPEED-UP/SPEED-DOWN" button ,
angle with INCLINE-UP / INCLINE-DOWN. The User may also pause (STOP) or STOP (2x) the workout, and will at the conclusion of
any given program automatically enters the COOL DOWN program
http://www.yowzafitness.com/
"
SAVE
with the speed 3.2KM/H.
"
button to save the recorded workout
55