Front Panel Features - OSEE RMM1024 User Manual

RMM1024 Features
Center Marker: it is displayed in the center of the screen, and marks the
6.
center of the image. You can set whether to display it or not in MARKER
menu.
Audio Meter: it is displayed for audio monitoring. You can set its groups,
7.
direction, position and mode in AUDIO menu.
Timecode: it is displayed at the bottom of the image, the format is
8.
HH:MM:SS:FF, if there is no timecode available, the monitor will display
--:--:--:--.
IMD: the IMD text displays at the bottom of the screen, the length can't
9.
exceed 16 characters, and you can choose letter, number or other
character for it.
Headphone Interface: The Ω icon as shown in Screen No.1 is the
10.
headphone interface, it supports 3.5mm stereo, and the two screen
share one headphone interface.
 The Status Information usually displays as the following situations:
 "UNKNOW" appears if an unsupported signal is input.
 "NO SIGNAL" appears if no signal is input.
 The signal is normal, for example: 1080i59.94, NTSC, 1280X1024,
etc.
 The Status Information for the main picture displays at the top left corner
of the screen, and the Status Information for the slave picture displays at
the top right corner of the screen.
 The AFD information displays at the top center of the screen.

4.1 Front Panel Features

It will introduce the arrangement and the operations of the buttons in front of
the panel in the following.
8