Operation; Heat Sentry - Rangemaster RMDD3004 Instruction Manual

OPERATION

All Units
Turn the downdraft blower ON by pressing down on the activating
s w i t c h . T h e a i r v e n t w i l l r i s e .
The blower can be turned ON or OFF and its speed can be
adjusted with the recessed knob on the right side of the air vent.
Turn the downdraft blower OFF by pressing the activating switch
again. The air vent will go down and the blower will shut OFF.
Note: For most convenient operation, set the blower to your
favorite speed. The blower will come on to this speed whenever
the activating switch is pressed and the air vent rises.

Heat Sentry

When chimney is UP and blower is ON (at any speed) or OFF:
KNOB
If the exhaust temperature becomes higher than expected, the
Heat Sentry mode will activate and increase the blower speed to
HIGH.
Lowering the chimney will turn blower OFF - even if Heat Sentry
i s a c t i v e .
Downdraft Ventilators
Page 11