Setting The Dolby Digital - Sharp DV-NC55U Operation Manual

3
Press ENTER and then use ' or " to select "COMPRESSION".
4
Press ENTER to display the settings you can select.
AUDIO SETUP
5
Use ' or " to select "ON" or "OFF".
• Use of the "OFF" setting is recommended when the Unit is
connected to audio equipment.
6
Press ENTER to confirm the setting.
• When you have completed the above setting, press RETURN
to exit the SETUP screen. However, if you want to specify the
" DIGITAL" setting in succession, proceed to step 1 below.
• Whenever the "COMPRESSION" setting is "ON", VIRTUAL Dolby setting is
automatically changed to "OFF".

Setting the DOLBY DIGITAL

When playing a disc recorded using Dolby Digital (5.1ch), you can
specify either "BITSTREAM" or "D-PCM" as the digital type output.
• Before setting the "
44 and 45.
1
Press ENTER and then use ' or " to select "
2
Press ENTER to display the settings you can select.
AUDIO SETUP
3
Use ' or " to select "BITSTREAM" or "D-PCM".
BITSTREAM: Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby Digital
decoder.
D-PCM: Use this setting for a digital connection to the
(Down Mix PCM) PCM digital input jack of a DAT or MD, or for
a digital connection to a receiver (amplifier)
that does not have a Dolby Digital decoder.
4
Press ENTER to confirm the setting.
5
When you have completed the setting above, press RETURN to
exit the SETUP screen. However, if you want to go on and
specify the other settings, use ' or " to display other SETUP
screen.
COMPRESSION: OFF
DIGITAL: ON
OFF
DIGITAL" , perform the step 1 to 3 on pages
COMPRESSION: ON
DIGITAL: BITSTREAM
BITSTREAM
D-PCM
POWER
CANCEL
RETURN
DIGITAL".
DVD Setup
TIMER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
SET
ENTER
ENTER
ZERO BACK
RETURN
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
45