Preparing To Use Vcr - Sharp DV-NC55U Operation Manual

Preparing to Use VCR

Connecting the Unit and TV using an
antenna cable and the DVD/VCR shared
output jack
TV
Turn on the TV and switch the TV channel to the external "VIDEO" or
"AV" channel which is connected to the DVD /VCR shared output
jack.
This Unit
1
Press POWER.
2
Move VCR/DVD CHANGE Switch on the remote control to
VCR.
Connecting the Unit and TV using only an
antenna (coaxial) cable
TV
Turn on the TV and switch the TV to either channel 3 or 4 (the
channel used for VCR).
This Unit
1
Press POWER.
2
Move VCR/DVD CHANGE Switch on the remote control to
VCR.
3
Press TV/VCR on the remote control to display "VCR" on the
VCR Front Panel Display.
52
POWER
TIMER
POWER
TV/VCR EJECT
ON/OFF
TV/VCR
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
CANCEL SET
RETURN
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR/DVD
VCR DVD
CHANGE
Switch
VCR/DVD COMBINATION