TINS-A083UMZZEnglish.book Page 21 Monday, November 11, 2002 9:39 AM
Downloaded from:
http://www.usersmanualguide.com/
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
w
1.
Press
PLAY/X2
(
) to start the video tape playing.
2.
Press
SKIP SEARCH
on the remote control.
The number of times you press
determines the forward search time.
•
After searching, normal playback
will resume automatically.
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
/
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
DPSS
three times. DPSS 3 will appear on the on-screen display, and the VCR
will fast forward to locate the third recording after the current one.
3.
Press
DPSS
once. DPSS -1 will appear on the on-screen display and the VCR will
rewind to locate the beginning of the current recording.
Rewind
DPSS
Number
Current tape position
4.
To cancel the search before it has finished, press
NOTES:
•
Recordings must be longer than 3 minutes.
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
1 press
SKIP SEARCH
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
Fast Forward
DPSS Signals
+2
+1
r
STOP
(
) or
GB-21
= 30 seconds.
w
PLAY/X2
(
).