Auto Zero Back - Sharp DV-NC55U Operation Manual

Auto Zero Back

This function automatically forwards or rewinds the cassette to the
"0:00.00" point. Use this function to return to a recording start point.
1
Reset the counter to "0:00.00" with CANCEL before recording.
2
Press Æ Æ Æ Æ Æ REC to start recording.
3
After recording the desired program, press ËSTOP to stop
recording.
4
Press ZERO BACK to return to the recording start point
(0:00.00).
• During auto zero back, if the VCR rewinds (or fast forwards) the tape
all the way without finding the "0:00.00" point, it will stop at the
beginning (or end) of the tape.
• The counter start point "0:00.00" may differ slightly from the starting
point on the tape.
• This function is not operable during recording, recording pause,
simple recording timer or timer recording.
TIMER
POWER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
CANCEL
CANCEL SET
RETURN
ENTER
ZERO BACK
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
REC
STOP
59