ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
2.
Press
The number of times you press
determines the forward search time.
•
After searching, normal playback
will resume automatically.
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
For example,
1.
Load the video tape into the VCR.
2.
Press
will fast forward to locate the third recording after the current one.
3.
Press
rewind to locate the beginning of the current recording.
4.
To cancel the search before it has finished, press
NOTES:
•
Recordings must be longer than 3 minutes.
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
Downloaded from:
http://www.usersmanualguide.com/
w
PLAY/X2
(
) to start the video tape playing.
on the remote control.
SKIP SEARCH
SKIP SEARCH
/
to locate a previous programme or the next programme.
DPSS
three times. DPSS 3 will appear on the on-screen display, and the VCR
DPSS
once. DPSS -1 will appear on the on-screen display and the VCR will
Rewind
DPSS
Number
+1
Current tape position
1 press
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
DPSS Signals
+2
r
STOP
(
GB-18
= 30 seconds.
Fast Forward
w
) or
PLAY/X2
(
).