Virtual Dolby (Qsurround) Setting - Sharp DV-NC55U Operation Manual

About the Function Control Screen

VIRTUAL DOLBY (QSURROUND) setting

This function allows you to enjoy a "surround sound" effect when you
are using an analog connection (using AV1 OUT on this Unit) to 2-
channel audio equipment (TV, etc.).
Preparation
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see
page 44).
Refer to the table below about the types of audio format with which
VIRTUAL DOLBY (QSURROUND) works.
Types of audio recorded on the disc
Dolby Dolby
Digital Pro Logic
✕ ✕
1
Press FUNCTION CONTROL during playback.
• The Function control screen appears.
2
Use ' or " to select
3
Press ' or " to toggle VIRTUAL DOLBY between "ON" and
"OFF".
4
While "ON" is selected, use \ or | to change the level setting.
5
Press ENTER to confirm the setting.
• You can exit the Function control screen by pressing
RETURN or FUNCTION CONTROL.
90
Dolby Digital
2ch/Linear
DTS
PCM
— —
2/5
DVD
8/3‰
‰1:3‰:‰8
2 ENGLISH
1
1 51ch .
ON
ON
ON
and then press ENTER.
DVD
ON
DVD
ON
TIMER
POWER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
OPEN/
FUNCTION
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
CANCEL SET
RETURN
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
• VIRTUAL DOLBY (QSURROUND) does
not operate on Audio CDs.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you set the
"COMPRESSION" setting in "AUDIO
SETUP" to "ON".
• VIRTUAL DOLBY (QSURROUND) does
not operate when you are using a Digital
connection.
• QSURROUND™ is a trademark of
QSound Labs, Inc.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you play back a disc
recorded using Linear PCM or DTS
format.
FUNCTION
CONTROL
ENTER
RETURN