Sharp DV-NC55U Operation Manual page 28

Preparations Before Using the Unit
The Unit
REW PLAY
POWER EJECT/STOP
STANDBY
CH(TRACKING)
AV 2 IN VDEO L(MONO)-AUDIO-R
POWER
DVD Output
indicator
Watching DVD
1 1 2 2
When 1 1 1 , 2 2 2 and 3
TV
Turn on the TV and switch the TV channel to the external input
"VIDEO" or "AV" channel, which is connected to DVD output jack.
This Unit
1
Press POWER.
2
Move VCR/DVD CHANGE Switch on the remote control to
DVD.
Setup complete
Now you are ready to watch the DVD.
1 1 1 and 3
When 1 1
TV
Turn on the TV and switch the TV channel to the external "VIDEO" or
"AV" channel which is connected to the DVD /VCR shared output
jack.
This Unit
1
Press POWER.
2
Move VCR/DVD CHANGE Switch on the remote control to
DVD.
3
Press VCR/DVD SELECTOR on the remote control to enter the
DVD mode.
• The DVD Output indicator at the front of Unit lights up.
Setup complete
Now you are ready to watch the DVD.
• You cannot watch DVD if only 3 is connected.
28
1 Connect the TV to DVD/VCR shared output jacks.
2 Connect to the TV to DVD output jacks.
VCR / DVD COMBINATION
PLAY STOP
OPEN/
CLOSE VCR DVD
(AV 1 )
3 Connect the TV to ANTENA OUT
3 3
3 3 are connected
3 3 are connected 3
3
TV
POWER
TIMER
POWER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
VCR/DVD
OPEN/
FUNCTION
PROGRAM ZOOM SELECTOR
CONTROL CLOSE
TITLE
DVD MENU
CANCEL SET
RETURN
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SLOW
SPEED SKIP
AUDIO
CH OUTPUT
VCR DVD
VCR/DVD
CHANGE
Switch
VCR/DVD COMBINATION