Table of Contents
Advertisement
16 Section 3 Control Panel
Entering the Memory Switch Menu Mode
To enter the memory switch menu mode, follow these steps.
Press FEED/LOAD to load the continuous paper into the printer and turn off the
printer.
Press MODE while turning on the printer.
The printer will enter the option setting mode and print out the menu shown in
the figure below.
Use the following two control panel buttons to respond to the questions that appear at
the end of the print out.
MODE (YES) - Press to indicate an affirmative (YES) response.
Option Setting Mode
The option setting mode selects a paper loading method.
Load paper and enter the memory switch menu mode. The printer will print the
option setting mode menu.
The currently selected method is between brackets ([ 1). "None" indicates that
the paper loading with the cut sheet guide or push tractor is selected. "S/F
indicates that the paper loading with the sheet feeder is selected. "Pull"
indicates that the paper loading with the pull tractor is selected.
Press MODE for yes and FEED/LOAD for no to select the desired method.
The printer will enter the normal setting mode after selecting the desired paper
loading method in the option setting mode, and print out the main menu of the
normal setting mode.
Turn off the power to quit the menu mode when you not need to change the
printer settings in the normal setting mode.
Hide quick links:
Advertisement
Table of Contents
