NEC Pinwriter P2000/P2X User Manual page 50

42 Section 6 Programming
Table 6-2 Control Codes and Sequences (cont'd)
Control
Control Character
Equivalents
Code or
Hex
Sequence
ESC ? (s) (m)
1 B 3F(s) (m)
ESC K (nl)
ESC L (nl)
ESC Y (nl)
ESC Z (nl)
FS Z (nl)
Character Set Commands:
ESC % (n)
ESC &
(NUL)
ESC : (NUL)
(NUL) (NUL)
ESC R (n) (n)
52
ESC (n)
Decimal Function
27 63 (s) (m)
Assigns any graphics mode to any one of the four other
graphics commands.
selection."
27 75 (nl)
Sets 8-bit single-density dot mode (60 dpi).
27 76 (nl)
Sets 8-bit double-density dot mode (120 dpi).
27 89 (nl)
Selects high-speed, double-density dot mode (120 dpi).
n 1 +(n2x256)=number of dots.
27 90 (nl)
Selects quadruple-density dot mode (240 dpi).
nl +(n2x256)=number of dots.
28 90 (nl)
Selects high-density dot mode (360 dpi).
27 37 (n) Selects either internal or user-defined character set.
Loads user-defined characters into user-defined character
27 38 (0)
set (OQW1211276).
27 58 (0) Copies currently active character set to user-defined
character set.
2782 (n) Selects language character set.
n=O: United States
n=l: France
Selects italic or IBM character set.
27 116 (n)