Table of Contents
Advertisement
10 Section 2
Features and Controls
Paper Thickness Setting Lever
The paper thickness setting lever is set at one of 10 positions, depending on the
thickness of the paper or the number of sheets in a multi-ply form.
Table 2-l shows the guideline of the lever setting.
Paper Media
Copier paper, 63.7 gsm (17 lb)
Copier paper, 80.0 gsm (21 lb)
paper,
Bond
82.7
Multiply form, carbonless
Envelope, 77.3 gsm (20 lb)
If the print appears faded or when using thinner paper, move the lever backward
(toward lower-numbered position).
If the print smudges or when using thicker paper, move the lever forward (toward
higher-numbered position).
Copy Mode
set the
When you
forward positions, the printer enters the copy mode to maintain print quality.
In this mode, the printer prints at a lower speed.
Sheet Guide and Sheet Guide Ruler
The sheet guide allows you to feed single cut sheets to the printer. The paper guide
enables straight paper loadin g_ The ruler printed into the sheet guide helps you center
the paper. For example, when using A4-site paper (8 l/2-inch wide), set the paper
guide so that you can see the "A4" mark in the paper guide window.
Table 2-1
Recommended Lever Setting
Number of Sheets
(22
lb)
paper thickness setting lever at any of position 5 or more
Lever Position
1
3
1
3
1
4
3
1
Hide quick links:
Advertisement
Table of Contents
