Tearing Off Continuous Papers; Automatic Tear Off Feature; Loading For Rear Feed With Pull Tractor - NEC Pinwriter P2000/P2X User Manual

Section
28 4
Tearing Off Coniinuous Papers
This function can be used only when the tractor is installed as a push tractor.
Use the edge of the top cover to tear continuous papers. It is recommended that
forms be tom at the perforation.
is loaded on the platen.
and align the perforation with the top cover.
also returns automatically to the first print position when print data is
received from the computer.
With the tractor installed as a push tractor, you can tear off the continuous papers
without pressing FEED/LOAD. The printer will advance the paper and align the
perforation with the edge of top cover two seconds after printing of the last line.

Loading for Rear Feed with Pull Tractor

Use the following steps to load the printer with continuous papers for rear feed
Set the sheet guide sheet guide upright.
Set the paper selection lever to the rear position.
Open the top cover and set the paper thickness setting lever depending on the
weight and thickness of the paper.