Monark Exercise AB Monark has 100 years’ experience of bicycle production. The Monark tradition has yielded know-how, experience, and a real feel for the product and quality. Since the early 1900s, Monark’s cycles have been living proof of precision, reliability, strength and service. Those are the reasons why we are now the world leader in cycle ergometers and the market leader in Scandinavia in transport cycles.
Validation ����������������������������������������������������������������������������������12 Validation of force ���������������������������������������������������������������������12 Mechanical calibration ��������������������������������������������������������������13 Electronic calibration �����������������������������������������������������������������13 Scale - zero adjustment ������������������������������������������������������������14 Testing with Ergomedic 939 E ����������������������������������������15 Heart Rate (telemetry) ��������������������������������������������������������������16 Test person enforcement ����������������������������������������������������������16 Reviewing results ����������������������������������������������������������������������17 Trouble shooting guide ���������������������������������������������������18 Where to obtain additional information ������������������������19 Service ������������������������������������������������������������������������������20...
Page 4
Monark Exercise AB Monark has 100 years’ experience of bicycle production. The Monark tradition has yielded know-how, experience, and a real feel for the product and quality. Since the early 1900s, Monark’s cycles have been living proof of precision, reliability, strength and service. Those are the reasons why we are now the world leader in cycle ergometers and the market leader in Scandinavia in transport cycles.
Controlled digital by ECG or PC with RS232 Congratulations on your new Ergometer! cable The Monark 939 E is designed to perform stress tests • Connection of RS 232 cable in floor level when connected to an ECG device. When connected •...
See Fig: RPM meter and ECG-sticker. The Ergomedic 939 E is built on a stabile frame, a large well balanced flywheel, a break belt and a pendulum weight which measures the force. Pedals and a chain...
Initial operation To use the bike it has to be connected to an external The ergometer 939 E is to 100 % calibrated at the device such as an ECG device or a PC. The external factory. But as usual when the bike has been moved,...
Turn on power to the ergometer. The ergometer is now checking what type of device is connected. When Before installing the Monark Software for your finished a message appears on the PC screen. ergometer, you must take the following steps.
Follow the points 1 – 7. At point 7 press 0 and then ENTER. The Ergometer can now be controlled again from the terminal or an external PC. Alt. 1: ECG, Ergoline compatible command set, requested load value. Alt. 2: ECG, Ergoline compatible command set, current load value. Monark 939 E...
Press 3 and ENTER if the bike is connected to a Siemens Megacart ECG device, alt. 2. d) Press 0 if the bike is connected to a PC or a handheld controller. 7. After that press 0 twice to go back to main menu. Monark 939 E...
Calibration Validation The 939 E is a mechanically weighted and braked The following procedure will assure the user that the ergometer, making performance validation a simple ergometer is performing properly on a daily basis. procedure. The work performed on the ergometer is...
Check the scale calibration once a year or if required due to service. Fig: Calibration 1) The pointer’s 0-position 2) Adjusting weight of sinker 3) Locking screw 4) Calibration weight 5) Hook for calibration weight 6) Pointer at 4 kp Monark 939 E...
0-index in line with the indicator/moving pointer. Tighten the locknut after the adjustment. See Fig: Scale adjustments. Fig: Scale adjustment 1) Locking screw Monark 939 E...
Testing with Ergomedic 939 E The versatility of the 939 E / 939 Medical Ergometer Finally, put the chest belt on. Check for a minute enable it to be utilized in a variety of testing that a proper heart rate is displayed. The baseline environments.
In case of problems, turn off WiFi, Bluetooth and to consider what each test documentation says about similar on computers nearby. the pedal speed. Fig: Placement of the chest belt Fig: Electrodes on the back of the chest belt (1) Monark 939 E...
Excellent Good Good Above Average 46 Above Average 39 Average Average Below Average 32 Below Average 30 Fair Fair Poor Poor See also table 7 in “ Work tests with the Bicycle Ergometer“ by P O Astrand. Monark 939 E...
Check that the carriage block is taken off and that none of the covers is scratching. pedalling There is a click noise and a squeak noise • Loosen the chain. when pedalling Any problems with the computer • Send an email to the software developer HUR labs support: software@hur.fi software Monark 939 E...
• Åstrand P-O, ”Ergometri - konditionsprov”, Monark, Sverige. • Golding L. A, Myers C. R, Sinning W. E, Y´s way to physical fitness“, YMCA of the USA, Rosemont, IL, 1982 For more technical details, see the section entitled “Reference“.
EC Directive 1999/44/EC. In short, be damaged. Also check that pedal arms are firmly the directive states that your Monark dealer will be tightened on the crank axle, tighten if necessary. liable for any defects, which existed at the time of When the Ergometer is new it is important to tighten delivery.
The crank bearing is long term greased and requires no supplementary lubrication. If a problem arises, Brake belt contact surface please contact your Monark dealer. Deposits of dirt on the brake belt and on the contact Flywheel bearing surface may cause the unit to operate unevenly and will also wear down the brake belt.
Otherwise the chain and Fig: Chain replacement 4) Lock spring sprockets makes a lot of noise and wears out rapidly. 5) Movement direction 6) Chain lock Then assemble the removed parts as above but in reverse order. Monark 939 E...
The sprocket should be lubricated with a few drops of oil once a year. Tilt the cycle to make it easier for the oil to reach the bearing. See Fig: Lubrication. Fig: Lubrication Fig: Hub assembly Monark 939 E...
Need help?
Do you have a question about the 939 E and is the answer not in the manual?
Questions and answers