Rear Wheel Removal - Suzuki 2004 VL800 Owner's Manual

Failure to extend brake pads
after installng the wheel can
cause poor braking perfor-
mance and may result in an
accident.
Before riding, "pump" the
brake repeatedly until brake
pads
are pressed against the
brake disks and proper lever!
pedal stroke and firm feel are
restored. Also check that the
wheel rotates freely.
Failure to torque bolts and nuts
properly could lead to
an acci-
dent.
Torque bolts and nuts to the
proper specifications.. If you
are not sure of the proper pro-
cedure, have your authorized
SUZUKI dealer or qualified
mechanic do this.
Front axle tightening torque:
65 N.m (6.5 kgf-m, 47.0 Ib-ft)
Front axle holder bolt tightening
torque:
33 N.m (3~3 kgf-m, 24.0 Ib-ft)
Removing the. rear wheel with-
out use of an accessory stand
can result in your motorcycle
fallng over and being dam-
aged.
Do not attempt road side
removal
of the rear wheeL. Only
remove the rear wheel at a
properly equipped servicing
facilty using an accessory ser-
vice stand.
1. Place the motorcycle on the
side stand.
2. Remove the bolts CD and(î.
70
-----------._- --