Monitor Configuration - Honeywell HRDP H.264 Rev B User Manual

Hide thumbs Also See for HRDP H.264 Rev B:

Table of Contents

Monitor Configuration

______________________________________________________________________________________________

Document 800-06801 Rev F

02/13

TRANSPARENCY SETUP – 0 ~ 20 [Set the transparency of the setup

windows].

VGA RESOLUTION – Set monitor resolution.

FIT-IN VGA – Adjusts the display to display properly on a VGA monitor. When

the FIT-IN VGA check box is cleared, the display is adjusted to display on a

monitor connected to the MAIN BNC output.

OSD – Select the items to display on the screen (DATE, TIME, TITLE, PTZ,

RECORD, AUDIO).

Note

If the VGA RESOLUTOIN is set to a size that is unsupported by the

monitor, the monitor may display an "OUT OF RANGE" message or

not display any image. To reset the VGA RESOLUTION, use the

front panel or use the IR Remote that came with the DVR, point it at

the DVR and press "LIVE + 4 + 1 + 1 + ENTER".

HRDP H.264 Rev B DVR User Guide

Table of Contents