Control / Commissioning - Saunier Duval ISOTWIN CONDENS F 35 E Instructions For Use, Installation & Servicing

11 Control / Commissioning

Once the appliance is installed, check
whether it runs:
• Start the appliance according to the
indications of the operating instructions
and check whether it runs.
• Check the appliance for leaks (gas
and water) and eliminate any leakage
found.
• Check that the ignition is correct and
that the flames of the burner are
uniform.
• Check that the flue exhausts properly.
• Check the whole control and safety
devices, their setting and their
operating state.
12 User information
The user should know how to use the
appliance.
• Explain to the user the appliance
operating principles and demonstrate if
required.
• Have a look at the operating
instructions together and answer any
questions if need be.
• Give the user all of the manuals and
documents concerning the appliance
and tell the user to keep them near the
appliance.
• Explain more precisely the safety
principles they should observe.
• Remind the user to regularly service the
appliance.
13 Spare parts
In order to guarantee a long-lasting
operating of the parts of the appliance
and keep it in good condition, only original
spare parts from SAUNIER DUVAL should
be used when repairing and servicing the
appliance.
• Only use original spare parts.
• Make sure that these parts have been
correctly assembled with regards to
their position and basic sense.
38