Change The Recall Time - iDect eclipse 8035 Owner's Manual

10.5 Change the Recall Time

You may need to press
(also called Recall or Timed Break Recall) if you are connected to a PBX or
using certain network services. You should normally leave the Recall
Time at its default setting, Short (100ms), as this is the standard recall
required in the UK telephone network. However, it can be changed to
Medium (270ms) or Long (600ms) if your telephone is connected to a
PBX that requires a different recall time.
- On Your ECLIPSE Handset
1. From the home screen, press
2. Press
3. Press
select.
4. Press
then press
• A confirmation tone is played.
5. Press
(ECLIPSE Handset) to send a Flash signal
/ to SETTINGS and then press
/ to RECALL TIME and then press
/ to select SHORT, MEDIUM or LONG and
to confirm.
to return to standby mode.
.
48
to select.
to