Clock And Alarm Settings; Date And Time Settings - iDect eclipse 8035 Owner's Manual

8

CLOCK AND ALARM SETTINGS

8.1 Date and Time Settings

If you have subscribed to the Calling Number Display (CND) service, the
time and date settings will be automatically updated by the network
when you receive an incoming call, but you may still need to set the
correct year.
You can also set the date and time manually.
- On Your ECLIPSE Handset
1. From the home screen, press
2. Press
select.
3. Press
• The last stored date is displayed, with the third digit of the year
flashing.
4. Enter the current date and press
Enter 03 May 2012 as [1], [2], [0], [5], [0], [3](to change the date
format, see change the date format on page 37).
If you make a mistake, press
5. Enter the current time and press
format is 24 HOURS. (To change time format, see Change the Date
Format on page 36.)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press
am , or press
Press
• A confirmation tone is played.
6. Press
/ to CLOCK&ALARM and the press
again to select DATE & TIME.
-
to select pm.
to delete the last digit entered.
to return to standby mode.
.
to confirm.
to delete the last digit entered.
to confirm. The default time
35
to
to select