Table of Contents
Advertisement
iDECT ECLIPSE System
Remote operation
1. Using a tone-dialling phone, dial your home number.
# key immediately.
2. While your announcement is playing, press
3. Key in your Remote Access Code. (Default value is 0000.)
For details on how to set a new code, see
PIN
Change the Master
on page 47 of the User Guide.
Note: The
#
can be entered at any time after the announcement starts, and the
Remote Access Code should follow without any delay. If the Remote Access Code
is entered incorrectly twice consecutively, the call will end automatically.
4. Refer to the key operations on the reverse side of this card.
Note: If your answering machine is off, but with Remote Access activated (See
Access
Activate/Deactivate Remote
on page 53 of the User Guide) and Master
61
Hide quick links:
Advertisement
Table of Contents
