Select Mode For Dialling; Set Flash Time (Recall) - iDect X3I SYSTEM User Manual

Select mode for dialling

1 Press the button.
à The display shows Menu >SMS.
2
Use the UP/ or DOWN/ to select Base settings.
Press the button.
3
à The display shows Base settings > Base Ringtone.
4
Use the UP/ or DOWN/ to select Dial Mode.
5 Press the button.
6
Use the UP/ or DOWN/ to choose Pulse or Tone.
7
Once selected, press the
à The display shows Dial Mode Stored.
8
Press the HANG UP/C button to go back to idle mode.

Set flash time (Recall)

You may need to set the time flash if your phone is connected to
a PBX. The time of Recall 1 is 85ms and Rcall 2 is 100ms.
1 Press the menu button.
à The display shows SMS.
2
Use the UP/ or DOWN/ to select Base settings.
Press the button.
3
à The display shows Base settings > Base Ringtone.
4
Use the UP/ or DOWN/ to select Recall Mode.
5 Press the button.
6
Use the UP/ or DOWN/ to choose Recall 1 or Recall 2.
7
Once selected, press the
à The display shows Recall Mode Stored.
8 Press the HANG UP/C button to go back to idle mode.
iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate)
button for OK.
button for OK.
37