iDect eclipse 8035 Owner's Manual page 67

"The Caller Display feature isn't working"
You need to subscribe to the Caller Line Identification service from

your network service provider.
The caller may have withheld their number by dialling 1831. Or they

may be calling from a network that does not transmit the caller's
number (e.g. if they are making international calls.)
"When I try to make a call, I hear busy tone"
If you're using a multi-handset system, check whether another

handset is already on a call.
"The volume in the earpiece is low when I'm on a call"
Make sure you're holding the earpiece correctly over your ear.

Adjust the volume using

"I cannot store a phonebook entry"
The maximum number of 200 phonebook entries on your ECLIPSE

Handset has been reached. You must delete existing entries to make
space for new ones.
Intercom and transfer
"I can't transfer a call"
Make sure that the other handset is in range of the base unit.

Make sure that you have entered the correct number for the other handset.

Batteries
"The handset's battery cells are running low within an hour or two"
Before you first use the handset, you must leave it to charge on the

base unit or charging cradle for at least 15 hours.
You may need to replace the batteries.

Check the connection between the base unit and the mains power socket.

"I try to recharge the batteries but I still get a warning that they are
low"
You need to replace the batteries. Dispose of used batteries safely –

do not burn, immerse them in water, disassemble, or puncture the batteries.
Do not use non-rechargeable batteries in your handset – they may

explode, causing damage.
on the ECLIPSE Handset.
65