Answering Machine Settings; Set The Ring Delay - iDect eclipse 8035 Owner's Manual

11.3 Answering Machine Settings

11.3.1

Set the Ring Delay

You can select the number of rings before the answering machine
answers a call and starts playing the announcement.
You can set the delay from 2 to 7 RINGS or TOLL SAVER on the ECLIPSE
Handset.
IMPORTANT: If your network voice messaging system (e.g. the 1571
service) is enabled, you must set your RING DELAY to less than 6 rings;
otherwise the network service will answer all your calls before the
answering machine of your telephone and prevent it from recording any
messages.
- On Your ECLIPSE Handset
1. From the home screen, press
2. Press
3. Press
4. Press
5. Press
and then press
• A confirmation tone is played.
6. Press
Note: If you select TOLL SAVER on the ECLIPSE Handset, the answering
machine will answer an incoming call on the fifth ring if you have no new
messages and on the third ring if you do.
When you call your answering machine to check messages, if it does not
answer on the third ring, then you can hang up immediately, knowing
that you have no new messages. This feature can save you the cost of a
long-distance call when you check your messages remotely.
again to select ANS. SYSTEM.
/ to ANS. SETTING and then press
to select RING DELAY.
/ to select 2 RINGS – 7 RINGS or TOLL SAVER
to confirm.
to return to standby mode.
.
52
.