Kramer VP-558 Quick Start Manual

KRAMER
VP-558 Quick Start Guide
This guide helps you install and use your product for the first time. For more detailed information, g
http://www.kramerav.com/manual/VP-558 to download the latest manual or scan the QR code on the left.
Step 1: Check what's in the box
The VP-558 Presentation Switcher/Scaler
1 Power cord
Step 2: Install the VP-558
To rack mount the machine attach both ear brackets to the machine (by removing the three screws
from each side of the machine and replacing those screws through the ear brackets) or place the
machine on a table.
Step 3: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to the VP-558.
Computer Graphics DVD
Source (PC) Player
Source Audio
Inputs
RJ-45 Pinout
For the Ethernet and HDBaseT connectors,
see the proper wiring diagram below
EIA / TIA 568B
PIN
1
2
3
4
5
6
7
8
For optimum range and performance use Kramer's
BC-HDKat6a cable. This specially built cable significantly
outperforms regular CAT 6 cables.
VP-558 Quick Start (P/N: 2900-300433QS REV 1)
Computer Graphics
Source (PC)
HDBT
Microphone
Receiver
Connect the audio output:
To a
balanced
Wire Color
acceptor:
Orange / White
Orange
Green / White
Blue
Connect the audio AUX IN input:
Blue / White
Green
Brown / White
Brown
To a
balanced
source:
1 Set of rack ears
4 Rubber feet
VP-558 .
HDBT Smart
Transmitter Whiteboard
Audio Power
LCD
Amplifier
Display
o to
1 Quick start guide
PC
Control Device
Audio Power
Active
Amplifier Speakers
To an
unbalanced
acceptor:
To an
unbalanced
source:
P/N:
2 9 0 0 - 3 0 0 4 3 3 QS Rev: 1